27
38” CUTTING DECK, BELTS, BRAKES
ITEM PART NO. DESCRIPTION
25 2-9355 BOLT, 1/2-13 x 3-3/4” Hex Head Cap, Grade 5
26 5-8121 ASSEMBLY, Center Spindle (See Page 28 & 29)
27 9-1194 WASHER, .531 I.D. x 1-1/2” O.D. Flat
28 9-0975 NUT, 1/2-13 Hex Center Lock, Grade A
29 1-4532 PULLEY, 5” O.D. (2)
30 7-4467 NUT, 3/4-16 Hex Spindle Jam, Grade 8 (2)
31 5-8231 V-BELT, Blade Drive (Spindle to Spindle)
32 9-1305 SCREW, 3/8-16 x 2” Hex Head Cap, Grade 5 (3)
33 1-5226 FINGER, Belt
34 9-1807 WASHER, 7/16” I.D. x 1-3/8” O.D. x 1/4” Thick Flat
35 9-1514 WASHER, .406 I.D. x .812 O.D. x .075 Thick Flat (4)
36 3-5867 PULLEY, 2-3/4” O.D. Flat Idler
37 9-1585 NUT, 3/8-16 Hex Center Lock, Grade 5 or B (2)
38 2-8774 SPACER, .39 x .625 x .19
39 5-8265 LINK, Blade Idler
40 2-3954 PULLEY, 3.47 O. D. Flat Idler
41 2-9000 SPACER, Blade Hub (2)
42 2-4914 SPRING, Extension
43 9-1633 NUT, 9/16-18 Hex, Grade B
44 2-4467 WASHER, 9/16” Belleville (2)
45 4-2998 BLADE, 19.64”
46 7-2109 WASHER, Spindle Blade
47 1-3313 BEARING, Spindle (2)
48 4-7163 SHAFT, Spindle (Series 0)
-- 7-2848 SHAFT, Spindle (Series 1)
49 4-7172 WELDMENT, 38” Deck Spindle Housing (Series 0)
-- 7-2847 WELDMENT, 38” Deck Spindle Housing (Series 1)
50 1-3324 FITTING, 3/16” Lube
51 1-2491 RING, 1-3/4” External Retaining (2)
R. E. RIDER (HYDRO) SERIES 0 & 1 MANUAL No. 06123
To Next Page
Loading...
