29
CENTER SPINDLE ASSEMBLY
ITEM PART NO. DESCRIPTION
1 7-4467 NUT, 3/4-16 Hex Flange Jam, Grade 8
2 1-0740 RING, 2” External Retaining (3)
3 1-0935 WASHER, 3/4” I.D. x 1-1/8” O.D. x 1/16” Thick Flat (4)
4 1-2491 RING, 1.75 External Retaining (2)
5 1-3313 BEARING, Spindle
6 1-4304 WELD PIN, .37 x 2”
7 1-4314 SPACER, .31 I.D. x .39 O.D. x 1” Nylon
8 1-4343 BUSHING, .27 I.D. x .35 O.D. x .4 Flanged
9 1-4532 PULLEY, 5.0 O.D.
10 1-5290 PULLEY HUB, PM
11 3-2027 WASHER, 3/4” I.D. x 1-1/2” O.D. x 1/16” Flat (2)
12 6-3211 BAND, Brake
13 3-5378 DRUM, 17mm Brake
14 3-6521 SPRING
15 2-6677 EYE-BOLT, 1/4-20 Thread
16 4-6761 WELDMENT, Spindle Bracket/Housing
17 4-6782 SPRING, Rectangle Wire Die
18 4-7229 SPINDLE, Center
19 5-8235 WELDMENT, Idler Arm
20 5-8367 BELT GUIDE, Front
21 7-2145 PULLEY, Jack Shaft
22 7-2146 BRACKET, Brake Cable
23 7-2147 IDLER ARM
24 9-0037 PIN, 3/32 x 3/4” Cotter (2)
25 9-0055 WASHER, 1/4” Flat (2)
26 9-0122 WASHER, 3/8” SAE Flat
27 9-0356 NUT, 5/8-18 Hex Center Lock Jam
28 9-0585 NUT, 5/16-18 Hex Flange Lock (2)
29 9-0761 NUT, 1/4-20 Hex Top Lock
30 9-1303 BOLT, 5/16-18 x 1” Short Neck Carriage, Grade 5 (2)
31 7-1991 BELT, Engine to Deck
R. E. RIDER (HYDRO) SERIES 0 & 1 MANUAL No. 06123
To Next Page
Loading...
