Snapper 5 Series User Manual

Safety Instructions & Operator’s Manual for
INTERMEDIATE
REAR TINE TILLER
SERIES 5
MODEL
ICFR7005BV
CICFR5505HV
MODEL NUMBER EXPLANATION
I C F R 70 05 BV
MODEL DESIGNATION ENGINE MODEL
REAR TINE MODEL SERIES DESIGNATION
ENGINE HP
C – Commercial Model 55 – 5.5 HP (Horse Power) 5 - Series Designation B – Briggs Engine
I – Intermediate Size Model 70 – 7.0 HP (Horse Power) H – Honda Engine
C – Counter Rotating Tines V–Over Head Valve
F – Forward Rotating Tines
R – Rear Tine Type Model
Thank you for buying a SNAPPER Product! Before operating your TILLER, read this manual carefully and pay
particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 & 3. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense!
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
MANUAL No. 7-5736 (I.R. 5/15/03)

Snapper 5 Series Specifications

General

Brand	Snapper
Model	5 Series
Category	Tiller
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

PROTECTION FOR CHILDREN

Safety guidelines for protecting children from tiller operation hazards.

SAFE HANDLING OF GASOLINE

Precautions for safely storing, transferring, and using gasoline.

OPERATIONAL PRECAUTIONS

Guidelines for safe operation and immediate actions during use.

Section 2 - OPERATING INSTRUCTIONS

BEFORE OPERATING

Familiarization with controls and proper operation before starting the tiller.

PRE-START CHECKLIST

Essential checks before starting the engine and tiller for safe operation.

BRIGGS ENGINE STARTING - STOPPING

Procedures for starting and stopping Briggs & Stratton engines.

HONDA ENGINE STARTING - STOPPING

Procedures for starting and stopping Honda engines.

WHEEL & TINE STARTING - STOPPING

How to engage and disengage tiller wheel and tine rotation.

ENGINE STARTING PROCEDURE

Step-by-step guide for starting the tiller's engine.

HANDLE BAR ADJUSTMENT

Instructions for adjusting the handlebar position for operator comfort.

TRANSPORTING

Methods for moving the tiller to different locations.

TILLING PROCEDURE

Step-by-step guide for operating the tiller to cultivate soil.

Section 3 - ADJUSTMENTS & REPAIR

SERVICE PARTS & ASSISTANCE

Information on obtaining genuine parts and dealer assistance.

STANDING THE TILLER ON END

Procedures and warnings for safely positioning the tiller upright.

TILLER LUBRICATION

Guidance on checking and adding lubrication to the tiller's chain case.

TILLER TINES

Information on replacing tiller tines and proper bolt torque.

BELT ADJUSTMENT - REPLACEMENT

Instructions for adjusting or replacing the drive belt and checking tension.

TINE REPLACEMENT

Detailed steps for removing and installing tiller tines.

OFF SEASON STORAGE

Procedures for properly preparing the tiller for storage.

2 YEAR LIMITED WARRANTY

DISCLAIMER OF WARRANTY

Limitations and exclusions of the product's warranty coverage.

PRIMARY MAINTENANCE

STARTING CHECK LIST

A checklist of items to verify before starting the engine for operation.