SERVICE
6. If necessary, loosen front belt guide and move out
of way. See Figure 40.
\,_ LoosE.F.O.T
\ BELT_O,DE..D
MOVEOUTOFW.Y
J
TRACTION DRIVE"
_ PULLEY
DRIVE BEI
NOTE
CLUTCH/BRAKEPEDAL
MUST BE DEPRESSED
ANDLOCKED
FIGURE 42
MOWERDRI
°
FIGURE 40
Remove hairpin from front of CONTROL ROD,
then lower CONTROL ROD. See Figure 41.
tNTROL
t
:ONTROL ROD
,
Loosen retaining nuts on fixed idler and tension
idler pulleys and slide belt guides out enough to
allow belt removal. See Figure 43.
LOOSEN NUTS
FIGURE 43
.
FIGURE 41
Remove DRIVE BELT from engine pulley.
See Figure 42_
10. Working at the rear of the tractor, pull DRIVE
BELT back until it can be removed from
TRANSAXLE PULLEY.
15
I
To Next Page
Loading...
