Snapper LT160H42HBV - Page 11

STEERING WHEEL, CONSOLE, FUEL TANK
Footnotes:
TP 400-5015-6-TC-N
Manual No. 7006449LAWN TRACTORS ELECTRIC CLUTCH
SERIES H & I
11
Part No Descri
p
tionItem Qt
y
Note
1 7053746 1 ASSEMBLY, Console (Includes items 2 thru 7) used on all models
2 7028565 1 CONSOLE, OPPLT-Electric Clutch
3 7011791 4 RETAINER, 5/16” Bolt
4 7091495 2 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
5 7053398 2 ASSEMBLY, Strap-Clinch Stud replaces 52891
6 7076978 2 NUT, 1/4-20 Hex Nyloc
7 7026196 1 ASSEMBLY, BEARING, Flange .75 I.D. PM
8 7091575 4 NUT, 5/16-18 Hex Center Lock, GR 5 or B
9 7022368 1 GEAR, Pinion, Steering
10 7022369 1 PIN, Dowel, 1/4 x 1-1/4”
11 7024641 1 WIRE TIE, 1.29 long Black LT160H42HBV2 &
LT180H48HBV2 only
12 7052907 1 ASSEMBLY, Fuel Tank/Cap 8-QT (Includes item 13)
13 7012515 1 CAP, Fuel Tank Was 14363
14 7091290 2 NUT, #10-24 Hex Nyloc Was 91599
15 7026343 1 SWITCH, Ignition-Afterfire Solenoid (Includes item 27)
16 7090951 1 NUT, 5/16-18 Hex Large Flange Center Lock
17 7033883 1 BRACKET, Hood Latch Catch
18 7022380 1 SHAFT, Steering
19 7012765 1 PIN, .26 x 2-1/4” Spiral
20 7028679 1 LIGHT CLUSTER, Indicator LT160H42HBV2,
LT180H48HBV2 & all Series “I”
21 7029595 1 STEERING WHEEL, Kelch Vector
22 7028562 1 DECAL, Console used on Model LT160H42HBV
-- 7028563 1 DECAL, Console LT160H42HBV2 &
LT180H48HBV2
-- 7075447 1 DECAL, Console used on Model LT160H42IBV
-- 7075308 1 DECAL, Console used on all other Series “I”
Models
23 7073406 1 KEY, Switch (With Cover) Was 23504
24 7091001 1 SCREW, 5/16-18 x 5/8” Truss Head (Torx)
25 7023187 1 LIGHT SWITCH, Rocker SPST
26 7029714 1 SPACER, .65 x .88 x .10 LT160H42HBV &
LT160H42HBV2 only
27 7012685 1 NUT, 5/8-32 Hex Was 29721
28 7023506 1 BEZEL
29 7091188 2 SCREW, #10-24 x 5/8” Flat Head Cross Countersunk Machine
30 7091018 1 NUT, #8-32 Hex, GR 2 or B
31 7023655 1 LEVER, Throttle Control
32 7024642 1 CONTROL, Throttle (conduit length: 44.60”) used on Model LT160H42HBV
-- 7028564 1 CONTROL, Throttle (conduit length: 26.25”) LT160H42HBV2,
LT180H48HBV2 & Series “I”
-- 7075449 1 CONTROL, Throttle (conduit length: 48.0”) used on Model LT160H42IBV
NOTE: Snapper Part Number is stamped on throttle control conduit.