Snapper NXT2346

Failure to read and follow the safety warnings and
instructions in this document and in the operator’s
manual could result in death, serious injury, and/or
property damage.
The warnings and instructions must be read,
understood, and followed when setting-up, operating,
servicing, transporting, or storing the unit.
EN
WARNING
1752031_D_
No leer o seguir las advertencias e instrucciones de
seguridad incluidas en este documento y en el
manual del usuario puede ocasionar la muerte,
lesiones graves y/o daños en la propiedad.
Las advertencias y las instrucciones deben leerse,
entenderse y seguirse al configurar, usar,
reparar/mantener, transportar o almacenar la
unidad.
ES
ADVERTENCIA
EN Anti-Seize Lubricant
ES Lubricante antiadherente
FR Lubrifiant antigrippant
ANTI-SEIZE
lb-ft / Nm
(2X) 7/16, 1/2
(1X) 9/16, 3/4
< 1/8˝
(< 3 mm)
15/16
52˝42˝ 46˝
Veillez à lire et à suivre toutes les consignes de
sécurité et directives de ce document et dans le
manuel d'utilisation pour écarter tout accident mortel,
de graves blessures et/ou des dommages matériels.
Les avertissements et les directives doivent être lus,
compris et suivis lors de l’assemblage, du montage,
de l’utilisation, de l’entretien, du transport ou du
remisage de la machine.
FR
AVERTISSEMENT
EN Setup Instructions
ES Instrucciones de montaje
FR Instruction de montage
Copyright © 2013 Briggs & Stratton Power Products Group, LLC
Not for
Reproduction

Snapper NXT2346 Specifications

General

Cutting Height	1.25 - 3.75 inches
Cutting Positions	6
Deck Material	Steel
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge	Yes
Starter Type	Recoil
Engine	Briggs & Stratton

Summary

Safety Warnings and Precautions

Battery Safety and Handling Precautions

Warnings regarding battery explosion risk from hydrogen gas and handling lead compounds.

EFM System Voltage Spike Protection

Guidance to protect the EFM system from voltage spikes during electrical connections.

Assembly and Adjustments

Initial Component Assembly

Instructions for assembling steering wheel and related initial components.

Tire Inflation and Pressure Settings

Setting tire pressures to specified values and warnings about over-inflation.

Mower Deck Leveling Procedure

Steps and adjustments for ensuring the mower deck is properly leveled.

Operational Checks

Engine Oil Level Check Procedure

Procedure for verifying the engine oil level is within the operating range.

Safety Interlock System Testing

Instructions for testing the tractor's safety interlock systems.