To Next Page
P
Patrick GonzalesJul 30, 2025
What to do if my Snapper NZM19480KWV, NZM21520KWV engine will not start?
- MMichael FordJul 30, 2025
If your Snapper Lawn Mower engine won't start, make sure the blade engagement switch is in the “OFF” position. Also, ensure the park brake is set, and you are properly seated in the operator's seat. Check that the motion controls are in the Neutral Lock Position. Verify that the fuel tank isn't empty and fill it with fresh fuel if needed. If the engine needs choking, move the choke control to the “CHOKE” position. Ensure the spark plug wire is connected to the spark plug, and the battery isn't weak or dead. If these steps do not resolve the issue, the parking brake, blade, or ignition switch may be faulty.
General
