Snapper P21500 User Manual

Safety Instructions & Operator’s Manual
21" HI-VAC WALK MOWERS
STANDARD MODELS
SERIES 0
\ R21400, P21400, RP21400
\ 21500, R21500, P21500
RP21500, R21500T2
RP21500T2, RP21500KWV
P21550V, RP21550V
Thank you for buying a SNAPPER product! Before operating your mower, read this manual carefully
and pay particular attention to the important Safety instructions on page 2. Remember that mowers
and all power equipment can be dangerous if used improperly and keep in mind that safety requires
careful use In accordance with the instructions and ....common sense!
This manual covers SNAPPER 21" HI-VAC Series 0 (last numeral in the five digit model
designation) walk behind mowers. A letter "D" prefix designates side discharge models. Models
with an "M" prefix are recycling mowers. Those having a "P" prefix are self-propelled. Models
having a "T" suffix are Tecumseh powered; all others are Briggs & Stratton powered. A number 2
suffix denotes 2-cycle engines, and a "V" is used to distinguish engines equipped with overhead
valves. Differences are pointed out wherever pertinent, throughout the manual.
®McDonough, GA.,30253 U.S.A.
INSTRUCTION NO. 2-5080 (REV. 1, 7/93)

Snapper P21500 Specifications

General

Cutting Width	21 inches
Oil Capacity	20 oz
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge	Yes
Cutting Height Adjustment	6 positions (1.25-3.75 inches)
Drive Type	Self-propelled

Summary

Safety Instructions and Manual Overview

General Safety Precautions

Read manual carefully and pay close attention to important safety instructions before operating.

Important Safety Instructions

Training and Pre-Operation Checks

Familiarize with controls, ensure proper use, and inspect area and mower before starting.

Safe Operation and Maintenance Practices

Follow operational guidelines, avoid hazards, and maintain mower for safe and reliable use.

Pre-Start Checks and Engine Starting

Essential Pre-Start Checks

Rope Start Procedure

Mowing Adjustments and Procedures

Adjusting Cutting Height

Safe procedure for adjusting the mower's cutting height using adjustment latches.

Recycling and Mowing Tips

Mowing, Bagging, and Service

Grass Bag Handling

Lubrication and Blade Maintenance

Lubrication Schedule

Cutting Blade Service

Inspect, sharpen, and replace mower blades for optimal performance and safety.

Blade Service and Clutch Linkage

Blade Sharpening and Retention

Clutch Linkage Adjustment

Drive System Maintenance

Driven Disc Service and Adjustment

Troubleshooting, adjustment, and replacement procedures for the driven disc assembly.

Component Service and Replacement

Bearing and Belt Service

Procedures for replacing bearings and servicing drive belts on the mower.

Belt Replacement and Storage

Poly-V-Belt Replacement

Mower Storage Guidelines