EasyManua.ls Logo

Snapper P2167519B - User Manual

Snapper P2167519B
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Safety Instructions & Operator’s Manual for
21” STEEL DECK
WALK MOWERS
SERIES 19
MODEL NUMBER EXPLANATION
P 21 70 19 B V E
SELF-PROPELLED ENGINE OPTION
CUTTING WIDTH ENGINE DESIGNATION
ENGINE HORSE POWER * SERIES DESIGNATION
P – Self Propelled Model 60 – 6.0 HP (Engine Horse Power) 19 - Series Designation
21 – 21” Cutting Width 675 – 6.75 HP (Engine Horse Power) B – Briggs & Stratton V – Overhead Valve
70 – 7.0 HP (Engine Horse Power) KW – Kawasaki Engine E – Electric Start
Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay
particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
with the operating instructions and common sense.
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
COPYRIGHT © 2005
SNAPPER – A DIVISION OF SIMPLICITY MFG., INC.
ALL RIGHTS RESERVED
MANUAL No. 7100366 (I.R. 9/13/2005)
TP 100-5084-IR-WB-N
MODELS
2167519B
P2167519B
P217019BV
P217019BVE
P216019KWV

Questions and Answers:

Snapper P2167519B Specifications

General IconGeneral
BrandSnapper
ModelP2167519B
CategoryLawn Mower
LanguageEnglish

Summary

Model Number Explanation

Model Number Explanation

Details on how to interpret the mower model number.

Important Safety Instructions

Child Protection During Mowing

Guidance on keeping children safe during operation.

Safe Slope Mowing Practices

Safety precautions for mowing on inclines.

Pre-Operation Preparation

Steps to take before starting the mower.

Gasoline Handling Safety

Procedures for safe refueling and storage.

Mower Operation Guidelines

General instructions for using the mower safely.

Mower Maintenance and Storage

Guidelines for upkeep and storing the equipment.

Section 1 - Familiarization

Manual Introduction

Overview of the manual's purpose and scope.

Mower Nomenclature and Parts

Identification of mower parts and controls.

Section 2 - Operating Instructions

Pre-Start Checklist

Essential checks before operating the mower.

Starting and Operating the Mower

Procedures for starting and running the engine.

How to Stop the Mower

How to safely stop the mower.

Handle Height Adjustment

Steps to adjust handlebar height.

Cutting Height Adjustment

Instructions for setting grass cutting height.

Grass Bag Adapter Installation

How to attach the grass bag holder.

Recycling Plug Installation

Steps to install the mulching plug.

Grass Bag Installation

How to attach the grass collection bag.

Grass Catcher Installation

Steps for attaching the grass catcher.

Removing and Dumping Grass Catcher

How to empty the grass catcher.

Discharge Deflector Installation

Attaching the side discharge guard.

Recycling Cover Installation

How to install the mulching cover.

Recycling Operation Guide

Guidelines for mulching grass.

Section 3 - Maintenance

Maintenance Section Introduction

Purpose of the maintenance section.

Initial Service After 5 Hours

Initial maintenance tasks.

Engine Oil Change Procedure

Procedure for changing engine oil.

Transmission Grease Level Check

How to check transmission grease.

Mower Blade Inspection

Inspecting the cutting blade for wear.

Engine Drive Belt Inspection

Inspecting the engine drive belt.

Transmission Poly-V Belt Inspection

Inspecting the transmission belt.

Annual Service Schedule

Annual maintenance tasks.

Storage Procedure

Steps for preparing the mower for storage.

Section 4 - Repair & Adjustments

Mower Blade Replacement

Instructions for replacing the blade.

Standard Blade Wear Limit

How to identify blade wear.

Ninja Blade Wear Limit

Wear limits for Ninja blade type.

Blade Sharpening Guide

Procedure for sharpening the mower blade.

Wheel Drive Control Adjustment

Adjusting the self-propel control cable.

Driven and Drive Disc Service

Troubleshooting mower drive issues.

Cleaning Drive and Driven Discs

Cleaning discs to fix slippage.

Drive Spring Repair or Replacement

Fixing or replacing the drive spring.

Driven Disc Adjustment

Adjusting the driven disc for proper engagement.

Replacing Rubber Driven Disc

How to install a new rubber drive disc.

Replacing Driven Disc Assembly Bearing

Replacing the bearing in the drive assembly.

Replacing Pulley End Hex Shaft Bearing

Replacing the hex shaft pulley bearing.

Drive Belt Service

Maintenance for drive belts.

Engine Drive Belt Replacement

Replacing the engine drive belt.

Transmission Poly-V Belt Replacement

Replacing the transmission belt.

Battery Service

Procedures for battery maintenance.

New Battery Preparation

Steps for preparing a new battery.

Routine Battery Service

Routine battery maintenance.

Battery Storage Instructions

Storing the battery properly.

Battery Testing Methods

Methods for testing battery condition.

Troubleshooting Mower Issues

Maintenance Service Schedule

Two Year Limited Warranty

Primary Maintenance Overview

Introduction to Primary Maintenance

An overview of keeping the mower in good condition.

Air Cleaner Maintenance Guide

Importance and procedure for cleaning the air filter.

Fuel and Oil Handling Procedures

Proper methods for handling fuel and oil.

Pre-Start Engine Checklist

A list of checks before starting the engine.

Product Registration Form

Related product manuals