What to do if my Snapper RE100 engine will not start using the electric starter?
- LLarry HollandNov 15, 2025
To resolve the issue of a Snapper Lawn Mower engine not starting with the electric starter, you can try the following: * Ensure the fuel tank is filled with fresh fuel to the proper level. * Move the choke control to the 'CHOKE' position. * Place the spark plug wire onto the spark plug. * Replace a blown fuse with a new 20 AMP fuse. * Turn the ignition switch to the 'START' position. * Charge or replace the battery if it's weak or dead. * Clean and connect the battery cables, replacing them if broken. * Connect the starter cable, replacing it if broken. * Connect or replace the wiring harness if disconnected or broken. If these steps don't work, there may be a faulty parking brake, blade, ignition switch, interlock module, electric starter, or starter solenoid, in which...










