EasyManuals Logo

Snapper SB60V User Manual

Snapper SB60V
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
PROBLEM POSSIBLE CAUSE SOLUTION
Unit will not start.
1. Battery is not secure.
1. To secure the battery pack, make
sure the battery is fully secured in the
blower. Refer to Installing the Battery
section in this manual.
2. Battery is not charged.
2. Charge the battery pack according
to the instructions included with your
model.
3. Defective power switch.
3. Call 1-800-317-7833 for technical
service.
The unit will start, but air will
not ow through the tube.
Blocked tube.
Inspect the intake vent and blower
tube for any blockage of air ow. If so,
remove the blockage.
Cruise Control Lever doesn't
work.
The screw is loose.
Tighten the screw with a phillips head
screwdriver.
TROUBLESHOOTING TABLE
WARNING:
Always stop unit and remove the battery before performing all of the
recommended remedies below except remedies that require operation of the unit
.
Not for Reproduction

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Snapper SB60V and is the answer not in the manual?

Snapper SB60V Specifications

General IconGeneral
BrandSnapper
ModelSB60V
CategoryBlower
LanguageEnglish

Related product manuals