Snapper SP 58V - User Manual

Need help?

Do you have a question about the Snapper SP 58V and is the answer not in the manual?

Summary

INTRODUCTION

Overview

Detailed diagram of the lawnmower with numbered components for identification.

General safety instructions

Safety instructions for operation

Specific rules to follow during the product's operational use.

Work area safety

Precautions to ensure a safe environment during product operation.

Safety instructions for slopes

Guidelines for safely operating the product on sloped terrain.

Personal protective equipment

Recommends essential protective gear for safe product operation and maintenance.

Protective devices on the product

Importance of checking and maintaining product guards and deflectors.

Safety instructions for maintenance

MAINTENANCE

Maintenance schedule

Recommended intervals for performing various maintenance tasks.

To do a general inspection

Checks for loose parts and pinched cables before operation.

General recommendations for maintenance

Advice on warranty, product condition, and professional service.

To clean the product

Instructions for cleaning the product exterior and underside.

To clean the grass catcher

Method for cleaning the grass catcher to maintain efficiency.

To examine the tires

Precautions for preventing tire damage from environmental factors.

To examine the door and deflector

Steps to inspect the rear door and deflector for damage.

To replace the side discharge deflector

Procedure for removing and replacing the side discharge deflector.

OPERATION

To empty the grass catcher

Instructions for safely removing and emptying the grass catcher.

To set the cutting height

How to adjust the lawnmower's cutting height using wheel levers.

To assemble the grass catcher

Steps for attaching the grass catcher frame to the bag.

To change the cutting mode

How to switch between Auto, Boost, and ECO cutting modes.

Battery status indication during operation

Interpreting the LED indicators for battery charge and potential issues.

Basic cutting technique

Tips for effective grass cutting, blade sharpness, and cutting depth.

To change the product to bagging mode

Procedure to set the mower for rear bagging using the grass catcher.

To change the product to side discharging mode

How to configure the mower for side discharge for optimal performance.

To change the product to mulching mode

Steps to activate mulching mode for lawn fertilization.

To start the product

Detailed steps for safely starting the lawnmower after battery insertion.

Summary

INTRODUCTION

Overview

Detailed diagram of the lawnmower with numbered components for identification.

General safety instructions

Safety instructions for operation

Specific rules to follow during the product's operational use.

Work area safety

Precautions to ensure a safe environment during product operation.

Safety instructions for slopes

Guidelines for safely operating the product on sloped terrain.

Personal protective equipment

Recommends essential protective gear for safe product operation and maintenance.

Protective devices on the product

Importance of checking and maintaining product guards and deflectors.

Safety instructions for maintenance

MAINTENANCE

Maintenance schedule

Recommended intervals for performing various maintenance tasks.

To do a general inspection

Checks for loose parts and pinched cables before operation.

General recommendations for maintenance

Advice on warranty, product condition, and professional service.

To clean the product

Instructions for cleaning the product exterior and underside.

To clean the grass catcher

Method for cleaning the grass catcher to maintain efficiency.

To examine the tires

Precautions for preventing tire damage from environmental factors.

To examine the door and deflector

Steps to inspect the rear door and deflector for damage.

To replace the side discharge deflector

Procedure for removing and replacing the side discharge deflector.

OPERATION

To empty the grass catcher

Instructions for safely removing and emptying the grass catcher.

To set the cutting height

How to adjust the lawnmower's cutting height using wheel levers.

To assemble the grass catcher

Steps for attaching the grass catcher frame to the bag.

To change the cutting mode

How to switch between Auto, Boost, and ECO cutting modes.

Battery status indication during operation

Interpreting the LED indicators for battery charge and potential issues.

Basic cutting technique

Tips for effective grass cutting, blade sharpness, and cutting depth.

To change the product to bagging mode

Procedure to set the mower for rear bagging using the grass catcher.

To change the product to side discharging mode

How to configure the mower for side discharge for optimal performance.

To change the product to mulching mode

Steps to activate mulching mode for lawn fertilization.

To start the product

Detailed steps for safely starting the lawnmower after battery insertion.

This document is an operator's manual for the Snapper SP 58V, a battery-powered lawnmower. It provides comprehensive information on the product's function, technical specifications, usage, and maintenance.

Function Description:

The Snapper SP 58V is a cordless, battery-powered lawnmower designed for cutting grass. It offers multiple cutting modes: Auto mode, Boost mode, and ECO mode, allowing users to adjust the cutting speed based on grass quantity and desired performance. The mower can be configured for rear bagging, side discharging, or mulching, providing flexibility for different lawn care needs. The rear bagging mode collects grass clippings in a grass catcher, while the side discharging mode ejects clippings from the side. The mulching mode finely chops grass clippings, returning nutrients to the lawn. The unit is powered by a 58V battery pack, which is inserted into the powerhead. It features a motor control handle for starting and stopping the motor, a cutting height control for adjusting the blade height, and a user control interface with LED lights to indicate battery status and cutting mode.

Important Technical Specifications:

Power Source: 58V battery pack (specific capacity not detailed in provided pages, but indicated by "58V").
Cutting Height Adjustment: 5 positions (1-5).
Operation Angle: Maximum recommended operation angle of 15 degrees for loading or moving.
Blade: Requires a 5/8 inch (16 mm) diameter steel bolt, pin, or cone balancer for checking balance.
Battery Status Indication: LED lights on the user control interface indicate battery charge levels (100%-76%, 75%-51%, 50%-26%, 25%-6%, 5%-0%).
Model Number: Snapper SP 58V.
Manual Part Number: 114114827.
Manual Revision Date: 2018-11-08.

Usage Features:

Starting and Stopping: The mower is started by inserting the battery pack, pulling the motor control handle, and pressing the flashing power button. It stops by releasing the motor control handle or pressing the power button.
Cutting Modes:
- Auto Mode: Automatically adjusts cutting speed based on grass quantity. This is the default mode.
- Boost Mode: Operates at high speed regardless of grass quantity, activated by pressing the cutting mode button once from Auto mode.
- ECO Mode: Operates at low speed, activated by pressing the cutting mode button once from Boost mode. The cutting mode button illuminates and flashes in ECO mode.
Cutting Height Adjustment: A height adjuster lever allows users to move the wheels up or down to select one of five cutting height positions. The medium position is recommended for most lawns. All four corners should be set to the same height.
Grass Catcher: The grass catcher is assembled by attaching the frame to the grass bag. It is emptied by lifting the catcher, removing clippings from below the handle, and then emptying the bag using both the frame and bag handles.
Side Discharging: Requires opening the side discharge guard and installing the side discharge deflector.
Mulching: Involves removing the grass bag, lifting the rear door, and letting the back shield close.
Battery Status Display: The user control interface shows battery capacity and indicates problems with the battery pack via LED lights.
Safety Precautions: Emphasizes reading the manual, wearing personal protective equipment (sturdy footwear, eye protection, hearing protection, head protection, heavy-duty slip-resistant boots, long pants, gloves), keeping children and animals away, and being cautious on slopes (cutting across slopes, avoiding wet grass, steep slopes, hidden objects).
Error Codes: The manual provides troubleshooting steps for various error codes indicated by battery pack LED flashes, such as loose battery pack, warm/cold battery pack, clogged cutting chamber, or motor controller issues.

Maintenance Features:

Maintenance Schedule: Recommends tightening bolts and nuts, cleaning and examining the grass catcher, examining tires, and cleaning the product after each use and before storage.
Blade Maintenance:
- Examination: Check for damage, cracks, and wear every 25 hours. Replace blades more frequently if cutting in sandy soil.
- Sharpening: Blades must be balanced after sharpening. It is recommended to have this done by an approved service workshop.
- Removal/Replacement: Requires stopping the engine, disconnecting the spark plug cap, locking the blade with a block of wood, removing the blade bolt, and then removing the blade. When attaching a new blade, ensure angled ends point towards the engine and the blade is aligned with the motor shaft.
Cleaning:
- Use a brush to remove unwanted material and grass.
- Use a scraper to clean below the deck.
- Do not use a high-pressure washer, water directly on electrical powerhead or battery contacts, cleaning fluids, or solvents.
- Hose cloth grass catchers with water and let them dry to prevent pores from filling with dirt.
Lubrication: Lubricate the product every 25 hours.
Battery Pack Care: Clean and fully charge the battery pack after use and before storage (max 24 hours). Do not keep the battery pack on the charger during storage.
General Inspection: Check for tight nuts and screws, and ensure no cables are pinched.
Deflectors, Guards, and Shields: Regularly inspect for damage, cracks, broken springs, or missing hardware and replace as needed.
Storage: Store in a dry, frost-proof, locked area away from children and unauthorized persons. Always remove the battery pack prior to transportation or storage. Use a correct protective cover that allows the product to breathe.
Service: Recommends having an approved dealer or service center perform extensive maintenance, adjustments, and repairs, and examine the product regularly.