CLUTCH ASSEMBLY
Footnotes:
TP 400-5049-1-HZ-N
Manual No. 7006181SCRAMBLER ZERO-TURN
SERIES 6
37
Part No Descri
tionItem Qt
Note
1 7091735 1 BOLT, 7/16-20 x 8” Hex Head, GR 5
2 7029138 2 WASHER, .468 I.D. x 1.50 O.D. x .188 Flat
3 7029136 2 BEARING, 6305 w/Snap Ring
4 7091601 6 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070
5 7029117 1 V-BELT, 5L Sect. Cog, 50.170” effective length used on 42” Deck models;
Primary Drive (Dayco #46-0364)
-- 7046997 1 V-BELT, 5L Sect. Cog, 49.44” effective length used on 48” Deck models;
Primary Drive
6 7029107 1 PULLEY, Jackshaft used in SZT18426BVE
-- 7046892 1 PULLEY, Jackshaft used in SZT20486BVE
7 7091829 2 SCREW, 1/4-20 x 1/2” Set w/Patch
8 7063269 1 SUPPORT, Jackshaft- TG 2000
9 7091508 6 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
10 7029135 1 JACKSHAFT, 5.525” long
11 7013250 1 KEY 1/4” Square x 1”
12 7063248 1 BRACKET, Anti-Rotation- TG-2000
13 7063246 1 CLUTCH, Warner TG-2000 (12V)
14 7091301 1 WASHER, 7/16” Split Lock
15 7090460 1 NUT, 7/16-20 Hex, GR 5 or B
16 7012652 1 WIRE CLIP 7/16”, Vinyl Covered
17A 7029137 1 SPACER, Jackshaft used in SZT18426BVE
17B 7063247 1 SPACER, Jackshaft, Warner Clutch used in SZT20486BVE
To Next Page
Loading...
