What to do if Snapper ST2046 engine will not turn over?
- JJames FarrellAug 21, 2025
If the engine of your Snapper Lawn Mower won't turn over, check these items: * Ensure the brake pedal is depressed. * Make sure the attachment clutch is disengaged. * A weak or dead battery can prevent the engine from turning over; recharge or replace the battery. * A blown fuse can also be the cause; replace the fuse. * Corroded battery terminals can impede starting; clean the battery terminals. * Loose or damaged wiring can be a factor; check all wiring. * A faulty ignition switch can prevent the engine from turning over; check or replace the ignition switch. * A faulty solenoid or starter can also be the cause; check or replace the solenoid or starter. * If there is a faulty operator presence switch(es), contact an authorized service center/department.











