How to fix a Snapper ST2046 Lawn Mower that will not start?
- MMackenzie FloresNov 18, 2025
If your Snapper Lawn Mower won't start, there are several potential causes: * The fuel tank may be empty, so you should fill it. * The engine may not be choked properly, so consult the “TO START ENGINE” section in the Operation section. * The engine might be flooded; wait a few minutes before trying again. * A bad spark plug could be the culprit, so replace it. * A dirty air filter can prevent starting, so clean or replace it. * A dirty fuel filter can also cause this, so replace the fuel filter. * Water in the fuel is another possibility; in this case, empty the fuel tank and carburetor, refill with fresh gasoline, and replace the fuel filter. * Loose or damaged wiring can also prevent starting, so check all wiring. * If the engine valves are out of adjustment, contact ...











