Snapper SZT20486BVE - Page 49

48" MOWER DECK ASSEMBLY (Part 1)
Footnotes:
TP 400-5049-1-HZ-N
Manual No. 7006181SCRAMBLER ZERO-TURN
SERIES 6
49
Part No Descri
p
tionItem Qt
y
Note
1 7013847 3 RETAINER, 3/8” Bolt
2 7034321 1 STIFFENER, 48” Deck, HOZ
3 7044848 1 WELDMENT, 48” Deck
4 7047047 1 HANGER Rear R.H.
5 7047048 1 HANGER Rear L.H.
6 7047049 1 BRACKET, Pulley Mounting
7 7074230 1 BRACKET, Front Lift L.H.
8 7074231 1 BRACKET, Front Lift R.H.
9 7059240 1 WELDMENT, Front Lift, 48 Ref: Item 22 on 48” FRONT
FRAME & COVER ASSEMBLY
page
10 7091619 6 NUT, 3/8-16 Hex Flange Lock
11 7058076 1 ASSEMBLY, Idler Arm- Lube Fitting (46706 Weldment & 13864
zerk)
includes 46706, Idler Arm
Weldment & one item 12
12 7013864 1 LUBE FITTING, Straight (press-fit for .187 dia. Hole)
13 7074951 1 BRACKET, Hinge, 48” Deck
14 7071698 1 SPACER, Pivot Collar, 48 HOZ
15 7091888 1 BOLT, 3/8-16 x 4” Square Neck Carriage, GR 5
16 7090799 12 BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR 5
17 7091923 6 BOLT, 3/8-16 x 3/4” Short Neck Carriage, GR 5
18 7091601 19 NUT, 5/16-18 Hex Flange Lock, GR 5
19 7090122 2 WASHER, 3/8” SAE Flat replaces 91514, 91296
20 7091593 2 PIN, 3/8 Self Locking Cotter
21 7044801 4 WELDMENT, Caster Bracket
22 7091169 4 BOLT, 5/16-18X1-1/8” Short Neck Carriage, GR 5
23 7027168 3 SCREW, 5/16-18 x 1” Hex Head Cap, GR 5 Was 90636
24 7075587 1 BRACKET, Stationary Idler