Snapper TUFF TORQ K50 - Page 4

Section I - GENERAL INFORMATION
INTRODUCTION
HOW TO USE THIS MANUAL
This manual contains the Service and Maintenance infor¬
mation required to properly inspect, service and repair
a SNAPPER TUFF TORO Model K50/K55 Hydrostatic
Transaxle. The manual is divided into sections for quick,
easy reference. Carefully read all procedures described
for servicing a particular component BEFORE repairs are
started, to avoid needless disassembly.
WARNINGS & CAUTIONS
Details of standard workshop safety procedures are not
included in this manual. WARNING & CAUTIONS occur
where procedures, if improperly performed, could cause
personal injury and/or damage to the transaxle or its com¬
ponents. These WARNINGS & CAUTIONS do not cover
all conceivable ways hazardous consequences could be
created by improperly following the instructions or by the
incorrect use of service tools.
TOOL REQUIREMENTS
The normal complement of Standard and Metric tools
found in most repair shops are all that will normally be
needed to repair the SNAPPER TUFF TORQ Model
K50/K55 Hydrostatic Transaxle.