EasyManua.ls Logo

Snapper YZ18386BVE, YZ18386BVE

Snapper YZ18386BVE, YZ18386BVE
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Safety Instructions & Operator’s Manual for
SCRAMBLER
HYDRO DRIVE
SERIES 6
MODELS
YZ18336BVE
YZ18386BVE
MODEL NUMBER EXPLANATION
Y Z 18 33 6 B V E
MODEL DESIGNATION ENGINE OPTIONS
DRIVE SYSTEM TYPE ENGINE TYPE
ENGINE HORSE POWER * SERIES DESIGNATION
CUTTING WIDTH
Y – SCRAMBLER
Z – Zero Turning Radius
18 – 18.0 HP Engine
33 - 33” Cutting Deck
38 - 38” Cutting Deck
6 - Series Designation B - Briggs Engine
V – Over Head Valve
E - Electric Start
Thank you for buying a SNAPPER Product! Before operating your SCRAMBLER, read this manual carefully
and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all
power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense!
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
COPYRIGHT © 2004
SNAPPER – A DIVISION OF SIMPLICITY MFG., INC.
ALL RIGHTS RESERVED
MANUAL No. 5-0405 (I.R. 7/27/04)

Table of Contents

Questions and Answers:

Snapper YZ18386BVE, YZ18386BVE Specifications

General IconGeneral
BrandSnapper
ModelYZ18386BVE, YZ18386BVE
CategoryLawn Mower
LanguageEnglish

Summary

Important Safety Instructions

Protection for Children

Ensures children are kept away from the mowing area and operator.

Protection Against Tip-overs

Guidelines to prevent accidents on slopes and uneven terrain.

Preparation

Steps to take before operating the machine.

Operation

Section 2 - Operating Instructions

2.1 PRE-START CHECK LIST

2.2 STARTING & OPERATION

Procedure for starting the engine and operating the machine.

2.3 STOPPING

Steps to safely stop the engine, wheel drive, and mower blades.

2.4 SAFETY INTERLOCK SYSTEM CHECKS

Procedures to check safety interlock systems.

Section 3 - Maintenance Instructions

3.2 SERVICE - AFTER FIRST 5 HOURS

3.3 SERVICE - EVERY 25 OPERATING HOURS

Section 4 - Adjustments & Repair

4.3 MOWER DECK & COMPONENT ADJUSTMENTS

4.3.5 BLADE BRAKE ADJUSTMENT

How to adjust the blade brake for proper stopping time.

4.3.7 MOWER DECK ADJUSTMENT (LEVELNESS) Side-To-Side

4.3.8 MOWER DECK ADJUSTMENT (LEVELNESS) Front to Rear Deck Pitch

4.4.2 BLADE SHARPENING

Troubleshooting

Service Schedule

Primary Maintenance

STARTING CHECK LIST

Related product manuals