Need help?Do you have a question about the Snorkel S3226E and is the answer not in the manual?
General| Model | S3226E |
|---|---|
| Category | Lifting Systems |
| Power Source | Electric |
| Maximum Working Height | 32 ft (9.9 m) |
| Platform Height | 26 ft (7.9 m) |
| Platform Capacity | 500 lb (227 kg) |
| Overall Width | 0.81 m |
| Platform Width | 0.81 m |
| Stowed Width | 0.81 m |
| Width | 0.81 m |
Guidelines for safe distances from energized power lines.
Risks associated with electrical contact and non-insulated components.
Safe distances from power lines per AS/NZS standards.
Information on the maximum load capacity of the platform.
Limits on force applied to objects outside the platform.
Restrictions on operating the platform in windy conditions.
Requirement for prestart checks before operation.
Hazards from moving components trapping body parts.
Risks of instability, tipping, and falling.
Precautions for charging batteries and electrical hazards.
Dangers associated with pressurized hydraulic fluid.
Location and operation of emergency stop buttons.
Function of the switch for selecting control modes.
How the interlock switch prevents accidental joystick movement.
Function of the alarm during lowering operations.
How to use the manual lowering system.
Purpose and use of the safety prop for maintenance.
Importance and components of the guardrail system.
Protection provided by the GFCI on the power outlet.
Function of the alarm when the chassis is not level.
How the Snorkel Guard disables functions when activated.
Procedure and safety precautions for charging the batteries.
Description of controls located on the chassis.
Function and location of the battery disconnect switch.
How to use the emergency stop button.
Switch to select control location and ground operation.
Switch to operate platform lift functions.
Description of controls located on the platform.
Controls for steering, driving, and platform movement.
How the interlock switch activates drive functions.
Switches for controlling steering direction.
Inspecting hydraulic fluid, reservoir, and components.
Testing the emergency stop button functionality.
Testing the interlock system for pothole protection.
Procedure for testing the emergency lowering system.
Proper use of the safety prop for servicing.
Review of various DANGER labels indicating specific hazards.
How to operate platform functions from the lower controls.
How to operate the platform from the upper controls.
Procedures for raising and lowering the platform.
Description of the lowering interrupt function.
How the overload system functions and its warnings.
Procedures for driving and steering the aerial platform.
Interlock between pothole protection and drive/lift.
Interlock between level sensor and drive/lift.
Procedure for manually lowering the platform in an emergency.
A table listing symptoms, causes, and corrective actions.
A checklist for pre-operation safety inspections.
To Next Page
