Need help?Do you have a question about the Snorkel S3219E and is the answer not in the manual?
General| Gradeability | 25% |
|---|---|
| Platform Height | 5.79 m |
| Working Height | 7.79 m |
| Lift Capacity | 227 kg |
| Machine Width | 1.22 m |
| Power Source | Electric |
| Maximum Platform Height | 5.79 m |
| Maximum Working Height | 7.79 m |
| Platform Capacity | 227 kg |
| Width | 1.22 m |
High-level danger notices regarding electrocution and chemical exposure.
Specific warning about chemicals in California.
Description and illustration of different lanyard anchor point types used on the platform.
Details risks associated with electrical contact and safe approach distances.
Explains risks of instability, slopes, and falling from the platform.
Covers safe operation limits in wind and weather conditions.
Overview of standard and optional features of the aerial platform.
Importance of the manual and understanding safety symbols and warnings.
Outlines user responsibilities per ANSI, AS/NZS, and CE standards.
Identifies key parts of the aerial platform with diagrams.
Detailed technical specs for various models including dimensions, capacity, and performance.
Risks of electrical contact, safe approach distances, and thunderstorm operation.
Covers tip-over risks, manual force limits, wind speeds, and workplace practices.
Details safety for electrical, hydraulic systems, placards, and general rules.
Explains emergency stop, control selectors, and interlock switches.
Covers pothole protectors, alarms, tilt sensors, and overload protection.
Details guardrails, GFCI, lowering interrupts, and horn/lights.
Explains battery charge and condition indicators for monitoring.
Describes the LCD display for operating time and battery power.
Guidelines for keeping batteries clean, checking fluid, and temperature effects.
Steps for safely charging the machine's batteries and precautions.
Operation of controls located on the chassis and platform for lift and drive.
Details joystick, interlock, steer, drive range, loading, and override controls.
Inspecting the manual and performing checks on electrical and hydraulic systems.
Inspecting tires, wheels, ground strap, controls, platform, and guardrails.
Ensuring all safety and operational labels are present and legible.
Steps for setting up the machine before use, including prestart inspection.
Using controls for raising, lowering, driving, steering, and managing platform features.
Operation of trays, racks, guards, and securing the machine daily.
Proper procedures for stowing the platform and securing it for transport.
Guidance on lifting, winching, and driving the machine onto transport vehicles.
Steps to safely lower the platform in case of hydraulic system failure.
Instructions for disengaging brakes and safely towing the machine.
Guide to identifying and resolving operational issues with the machine.
Definitions of terms used throughout the manual for clarity.
Official declaration of the machine's conformity to relevant EU directives.
A checklist for daily safety and operational checks before use.
Checklists for routine maintenance tasks at specified intervals.
Details on what is covered under the manufacturer's warranty policy.
Steps for submitting warranty claims and items specifically excluded from warranty.
To Next Page
