■
Daily Maintenance
S3970RT, S3370RT, &
S2770RT – 1441817 Rev A page
3
Maintenance Information
❑ Pre-operational inspection
(Set the KEY SWITCH to off before starting this inspection).
COMPONENTS SERVICE REQUIRED
Rough terrain scissor interlock tests (see page 16 in this section) Perform the tests to ensure the system is functioning
Fuel level Visually inspect
Fuel filter (diesel engines only) Visually inspect (condition)
Fuel leaks Visually inspect (hoses, connections, etc)
Engine Oil Check oil level (between dipstick lines)
Engine coolant Check fluid level and radiator hoses
Radiator cap Visually inspect (installation)
Air Filter Check condition (gauge)
Platform entrance gate Visually inspect (installation, operation)
Wiring harness and connectors Visually inspect (installation, condition)
Battery terminals Visually inspect (installation)
Battery fluid level Visually inspect (covers plates)
Hydraulic oil reservoir cap Visually inspect (installation)
Hydraulic oil level Check fluid level (at line on side of tank)
Hydraulic oil leaks Visually inspect (hoses, tubes)
Tires and wheels
Visually inspect (condition)
Bolts and fasteners
Visually inspect (looseness)
Structural damage & welds Visually inspect (weld cracks, dents)
Platform guardrails Visually inspect (condition)
Lanyard anchor points (option) Visually inspect (condition)
Bubble level indicator Visually inspect (condition)
Guides, rollers and slides Visually inspect (condition)
Non slip tread grip Visually inspect (condition)
Wrist support Visually inspect (condition)
Operator manual Visually inspect (that the manual is in the holder)
Placards, decals and operators manual Visually inspect (installation and condition)
START THE ENGINE FROM THE BASE CONTROL PANEL TO CHECK THE FOLLOWING
Charging system No faults on the display
Ground controls Actuate and visually inspect for proper operation
Emergency lowering (from the ground) Check operation (causes correct motion)
Flashing light Check operation
Safety prop Check operation
Parking brakes Check operation
Optional items Check operation
START THE ENGINE FROM THE PLATFORM TO CHECK THE FOLLOWING
Platform controls Actuate and visually inspect for proper operation
Emergency lowering (from the platform) Check operation
To Next Page
Loading...
