[ 8 ]
Getting Started
The SLXtreme 7 is partially charged from the
factory and can be used right out of the package.
For best results it is recommended that you fully
charge the case’s internal battery before use.
1. To access the micro USB charge port, peel
back the cover. See below.
2. Insert the micro USB end of the included
cable into the case’s micro USB charge port
and then connect the USB end into the USB
port on your computer or other USB enabled
power source.
3. The SLXtreme 7 case will automatically turn
on and the LEDs will indicate the current
charge level and charging status.
Note: If you are charging the SLXtreme case with the iPhone
in the case, the iPhone will charge to 100% before the case
will be charged.
Micro USB Port
To Next Page
Loading...