SNOWJOE SJ617E - User Manual

To Next Page

, LLC

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

, LLC Model SJ617E Form No. SJ-SJ617E-880E-MR2

OPERATOR’S MANUAL

ELECTRIC SNOW THROWER

18-INCH | 12-AMP

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Any electrical appliance can be dangerous if used incorrectly.

Some of the safety precautions given in this manual apply

generally to many appliances. Other warnings are specic

to the use of this snow thrower. Keep this manual for future

reference.

General Safety WARNINGS!

You and any other operator of this snow thrower must read,

understand, and follow these instructions in their entirety, and

should reread them at the start of each snow season. Failure

to follow these instructions may result in ELECTRIC SHOCK,

FIRE, and/or serious PERSONAL INJURY.

Notice the personal safety alert symbol

m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

1. Keep work area clean and well lit. Cluttered, dark areas

invite accidents.

2. Do not operate the snow thrower in an explosive

atmosphere, such as in the presence of ammable

liquids, gases, or dust. Electrical appliances create sparks

that may ignite the dust or fumes.

3. Keep children, pets, and bystanders away from the

work area. Be aware that the normal noise of the

machine when turned on may make it dicult for you to

hear approaching people. Spectators should wear safety

glasses and be kept a safe distance away from the work

area. Do not let spectators touch the snow thrower or the

extension cord.

4. Electrical plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

grounded appliances. Unmodied plugs and matching

outlets will reduce the risk of electric shock.

5. Avoid body contact with earthed or grounded surfaces

(i.e. upper and lower water pipes, radiators, ranges,

refrigerators, microwave ovens, and outer frames of

heating equipment). Take necessary precautions to avoid

electric shock. There is an increased risk of electric shock

if your body is earthed or grounded.

6. Do not abuse the cord. Keep the cord away from heat,

oil, sharp edges, or moving parts. Never carry the snow

thrower by its cord or yank the cord to disconnect it from

the electrical outlet. Damaged or entangled cords increase

the risk of electric shock.

7. Replace or properly repair damaged cords. If the cord

becomes damaged in any manner while plugged into the

wall receptacle, immediately pull the extension cord plug

from the receptacle.

8. Contact with water while operating the snow thrower

can result in electric shock and serious bodily injury.

Do not use the snow thrower in damp or wet locations or

expose to rain. Do not handle the plug or the appliance

with wet hands or while standing in water.

mWARNING – Use outdoor extension cords marked

SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or

SJTOWA. These cords are rated for outdoor use and

reduce the risk of electric shock.

10.Turnothepowerswitchanddisconnectthepower

cable before making any adjustments to the unit and

before inspecting, servicing, changing accessories, or

cleaning the snow thrower. Follow the same procedure

if any other dangerous conditions are present during

operation. Any adjustments to the unit should be

performed after revolving parts inside the snow thrower

stop completely. Such preventative safety measures

reduce the risk of starting the power tool accidentally.

11.Ifyoundthemainpowercableortheextensioncable

damaged, please pull out the plug from the socket and

disconnect the power immediately. Repair the cable or

replace it if necessary.

12. When replacing any parts, you must strictly observe

the instructions and procedures described in this

operator's manual. Special care should be paid to any

rubber parts, since these parts may increase the engine

load and decrease its mechanical power if damaged.

13. Do not move or transport the snow thrower when the

plug is connected to the power socket and the switch

is turned on.

14. If, during use, you notice that the unit runs unstably

or hear abnormal sounds from the engine, stop the

machine, disconnect the power immediately and

contact an authorized Snow Joe

+ Sun Joe

service

center.

Need help?

Do you have a question about the SNOWJOE SJ617E and is the answer not in the manual?

Summary

IMPORTANT! Safety Instructions

General and Specific Safety Warnings

Covers essential safety advice and 14 critical rules for operating the snow thrower to prevent injury.

Electrical Safety

Extension Cord and Plug Guidelines

Specifies requirements for extension cords and proper use of polarized plugs and outlets.

Safety Instructions for Walk-Behind Snow Throwers

Pre-Operation Checks and Procedures

Operational Safety and Maintenance

Operation and Safety

Extension Cord and Powering Operations

Guidance on securing the extension cord and safely powering the unit on and off.

Moving and Plowing the Snow

Safe Operation and Snow Throwing Techniques

Covers moving the unit, clearing paths, wind direction, and snow throwing techniques.

Throw Direction and Height Adjustment

Adjusting Discharge Chute Controls

This document describes the Snow Joe® Model SJ617E Electric Snow Thrower, an 18-inch, 12-amp walk-behind snow thrower designed for residential and personal household use.

Function Description:

The Snow Joe® SJ617E is an electric-powered snow thrower designed to clear snow from paved surfaces. It utilizes a 2-blade, temperature-resistant durable plastic auger to collect and discharge snow. The unit offers directional control for snow discharge, allowing users to adjust the throw direction and height. It is intended for use in various snow conditions, including dry or wet snow.

Important Technical Specifications:

Rated Voltage: 120 V ~ 60 Hz
Power: 12 A
No Load Speed: 2000 ± 10% rpm
Rotor: 2-blade, temperature-resistant durable plastic auger
Tire Size: 6.3 in. (16 cm)
Type of Snow: Dry or wet snow
Clearing Width: 18 in. (46 cm)
Depth of Snow Cut: 8 in. (20 cm)
Throw Distance (Max): 20 ft (6 m)
Plowing Capacity (Max): 550 lbs/min (250 kg/min)
Directional Control: 180° adjustable chute
Weight: 25.9 lbs (11.75 kg)

Usage Features:

The snow thrower is designed for user safety and ease of operation.

Safety Switch Button and ON/OFF Lever: To power on, the safety switch button must be depressed and held while pulling the ON/OFF switch lever. Releasing the lever powers off the unit. This two-step process prevents accidental starting.
Extension Cord Restraint Hook: An on-board cord restraint hook is provided to prevent the appliance cord from disconnecting from the extension cord during operation. Users can also tie a knot with the two cords for added security.
Polarized Plug: The appliance features a polarized plug, requiring a polarized UL-, CSA-, or ETL-rated extension cord for outdoor, all-weather use to reduce the risk of electric shock.
Adjustable Discharge Chute: The discharge chute can be rotated 180 degrees using a chute crank, allowing users to direct snow to the left or right.
Adjustable Chute Deflector: The chute deflector on top of the discharge chute controls the height of the snow stream. Knobs allow users to raise or lower the deflector to achieve the desired throw height.
Maneuverability: The unit can be moved by using the wheels on one side as a pivot point, allowing it to be slightly tilted forward or backward for easier movement.
Clearing Patterns: The manual provides guidance on effective snow clearing patterns for larger areas, such as driveways, to avoid throwing snow into unwanted places and eliminate the need for secondary removal.
Scraper Bar: The scraper bar at the base of the unit helps to clear snow effectively and can be adjusted for use on unpaved surfaces by pushing down on the handle to raise it above pebbles or gravel.
Outdoor Use Only: The snow thrower is intended for use with outdoor extension cords marked SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or SJTOWA.
GFCI Protection: Ground fault circuit interrupter (GFCI) protection is recommended for the circuits or outlets used with the snow thrower to enhance safety.

Maintenance Features:

Regular maintenance is crucial for the snow thrower's safety and longevity.

Pre-Operation Inspection: Before each use, operators should thoroughly inspect the unit, ensuring all parts are secure and installed correctly. Any abnormalities or damage should be repaired before operation.
Post-Operation Cleaning: After each snow removal session, the unit should be run for a few minutes to prevent the collector/impeller from freezing. The motor should then be shut off, and all revolving parts allowed to stop completely. Residual ice and snow should be wiped off, and the chute crank rotated several times to remove excess snow.
Cleaning: The snow thrower should be cleaned with a cloth soaked in hot water and a soft brush. Detergents or solvents should not be used as they can damage plastic parts.
Lubrication: The motor and auger are lubricated for lifetime use at the factory, and no additional lubrication is necessary.
Bolt and Screw Checks: Bolts and screws should be checked frequently for proper tightness to ensure safe working condition.
Part Replacement: Worn or damaged parts must be replaced with original replacement parts designed specifically for the model. The manual provides instructions for replacing the plastic auger, scraper bar, and belt.
Belt Replacement: Instructions are provided for replacing the drive belt, which may be necessary if the auger jams or malfunctions, or if heavy wet snow puts a load on the belts, requiring more frequent replacement.
Storage: Before storing, the engine should be allowed to cool, the extension cord disconnected and inspected, and the unit stored in a locked, dry place out of reach of children. Metal parts can be lightly oiled to prevent corrosion during long storage periods.
Service and Support: In case of unstable operation, abnormal engine sounds, or any other issues, users are advised to stop the machine, disconnect power, and contact an authorized Snow Joe® + Sun Joe® service center. Model and serial numbers, located on the main cover, are required for service and parts reordering.