IMPORTANT! – UPDATED CHUTE INSTALLATION PROCEDURE – IMPORTANT!
For ease of assembly and storage, we’ve simplied the chute installation process, as follows:
1. Align the lower chute to the slot in the collar (A), and rotate clockwise to the locked position (B).
2. Secure in place with the provided screw (C).
Refer to the operator’s manual to complete the installation.
If you have any questions or comments, please call the Snow Joe
®
+ Sun Joe
®
customer service department at:
1-866-SNOWJOE (1-866-766-9563)
Model SJ618E
18-INCH 13-AMP ELECTRIC SNOW THROWER
© 2016 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
REVISED Discharge Chute Assembly steps 1 – 2 (Figs. 18 – 21)
Lower chute
A
Locking arrow
B
Screw
C
To Next Page
Need help?
General
