To Next PageTo Next Page
Need help?Do you have a question about the SnowPure Electropure EXL-850 and is the answer not in the manual?
Discusses how feedwater impurities impact EDI module performance.
Lists the unique advantages of Electropure EDI modules over competitors.
Provides an overview of the Electropure EDI product lines and models.
Outlines purity requirements for various water applications.
Specifies purity requirements for semiconductor applications.
Outlines USP water quality requirements for pharmaceutical applications.
Describes the standard conditions under which modules are tested.
Specifies the required and recommended feedwater parameters for optimal operation.
Specifies the requirements for the DC power supply unit.
Explains how applied voltage affects EDI performance and water quality.
Discusses factors influencing the optimal voltage setting for EDI operation.
Describes the relationship between voltage settings and product water quality.
Explains how feedwater conductivity impacts module current draw.
Details how temperature affects product quality and optimal voltage adjustment.
Explains how outlet pressure impacts quality and potential internal leakage.
Explains how feed conductivity impacts product water quality.
Discusses the role of voltage as a driving force in EDI for water quality.
Describes the importance of ionic balance and pH for optimizing water quality.
Outlines SnowPure's philosophy on the importance of EDI feedwater pretreatment.
Details essential system protections and control measures for EDI modules.
Describes typical components found in an optimized EDI system configuration.
Details power supply requirements and pressure relief valves for EDI modules.
Emphasizes safety precautions for EDI module installation.
Provides guidelines for safely handling and lifting EDI modules.
Details power connection requirements and the critical importance of bolt torque.
Provides a step-by-step guide for the initial startup of EDI modules.
Lists causes and corrective actions for low product water resistivity.
Identifies causes and solutions for low product flow issues.
Addresses causes and corrections for low or no concentrate flow.
Details the terms and conditions of SnowPure's limited warranty for EDI modules.
Outlines the terms and conditions applicable to SnowPure product purchases.
Highlights critical electrical safety considerations for EDI system design and operation.
Provides a procedure for regenerating EDI modules to restore performance.
General| Brand | SnowPure |
|---|---|
| Model | Electropure EXL-850 |
| Category | Water Filtration Systems |
| Language | English |
