To Next PageTo Next Page
Need help?Do you have a question about the SnowPure Electropure XL-300 and is the answer not in the manual?
Provides an overview of SnowPure's Electropure™ EDI equipment and its benefits.
Highlights unique features and benefits of Electropure™ EDI modules compared to others.
Lists the required and recommended feed water quality for optimum EDI module operation.
Emphasizes the critical importance of feedwater pretreatment for EDI system performance.
Outlines essential protections and control measures for EDI modules and systems.
Lists causes and corrective actions for low product water resistivity.
Identifies causes and solutions for low product flow in EDI modules.
Lists reasons and fixes for excessive current draw by the EDI module.
Covers critical electrical safety considerations for EDI system design and operation.
Addresses safety precautions related to chemicals used or produced during EDI operation.
General| Model | XL-300 |
|---|---|
| Type | Electrodeionization (EDI) |
| Product Water Resistivity | Up to 18.2 MΩ·cm |
| Flow Rate | 300 L/h |
| Inlet Water Quality | RO Permeate |
| Outlet Water Quality | Up to 18.2 MΩ-cm |
| Operating Temperature | 5-45°C |
