Firstly, loop the strap around the back of one
of the SnüzPod
2
stand legs closest to the bed.
Take the strap over and down the inside of the
bed frame before bringing back up and clicking
the buckles together.
Then, repeat the above steps for the other
SnüzPod
2
stand leg.
Next, pull the strap cord to tighten and bring
the stand ush with your bed base, being
careful not to over tighten as this may cause
the stand to tilt.
Finally, when the bassinet is located onto the
stand, ensure that it sits fully down on the
stand and is not resting on any part on the
parents’ bed.
Do not over ghten the strap, as this may cause the stand
to lt. Ensure that the stand is ush with your bed frame.
p.21-34
We recommend tucking any excess strap
under your bed base, away from babies
and children.
Securing your SnüzPod² to your bed
If you have
a frame style bed
!
o
p
19
To Next Page
Loading...
