Firstly, loop the strap around the back of one
of the SnüzPod
2
stand legs closest to the bed.
Take the strap up and along the width of the
bed base. Bring the strap down the other
side and underneath the bed base, before
returning to click the buckles together.
Then, repeat the above steps for the other
SnüzPod
2
stand leg.
Next, pull the strap cord to tighten and bring
the stand ush with your bed base, being
careful not to over tighten as this may cause
the stand to tilt.
Finally, when the bassinet is located onto the
stand, ensure that it sits fully down on the
stand and is not resting on any part on the
parents’ bed.
If you have a divan
or solid bed base
We recommend tucking any excess strap
under your bed base, away from babies
and children.
p.21-34
!
o
p
20
To Next Page
Loading...
