Soca ST-680 - Page 11

11
Function (12) Anti-duress code :
Set up of anti-duress code (
＊,０〜９
). (pre-setting code is
＊
)
Function (13) Total cards:
Display total number of current registered cards.
Function (14) Program version:
Display program version.
Queuing for anti-duress
code input.
SET DURESS CODE
0 - 9 ,
＊
:
＊
9
SET DURESS CODE
0 - 9 ,
＊
:
＊
_
Key in 12
Key in ＃or ＊
Key in the ＃or ＊
Esc system function selection.
Go into function 12.
SYSTEM FUNCTIONS
SELECTION : _ _
status light on, display
function selection.
Key in
＃system password＃
Go into system function setup.
Setting successfully,
beep sound occurred.
back to system function selection.
Display total number of
current registered cards.
USER CARD COUNT
0200
Key in 13
Key in ＃or ＊
Press any key
Esc system function selection.
Go into function 13.
back to system function selection.
SYSTEM FUNCTIONS
SELECTION : _ _
status light on, display
function selection.
Key in
＃
system password
＃
Go into system function setup.
Display program version.
VERSION : V1
﹒
08
Key in 14
Key in ＃or ＊
Esc system function selection.
Press any key
Go into function 14.
back to system function selection.
SYSTEM FUNCTIONS
SELECTION : _ _
status light on, display
function selection.
Key in
＃system password＃
Go into system function setup.