14
Function (19) Door shutting time:
Time setting for sensing door-shutting time as to activate the alarm when exceeding the set
value. (pre-setting value is 030)
Function (20) Alarm mode:
(0) shows “ON”, (1) shows “OFF”. (pre-setting figure is 000) Once set at “ OFF “ , alarm
will not function.
Queuing for door
shutting time input.
DOOR SENSOR SEC
( 1 - 255 ) : 030 256
DOOR SENSOR SEC
( 1 - 255 ) : 030 015
DOOR SENSOR SEC
( 1 - 255 ) : 030 _ _ _
Key in 19
Key in
＃
or
＊
Esc system function selection.
Key in the ＃or ＊
Go into function 19.
SYSTEM FUNCTIONS
SELECTION : _ _
status light on, display
function selection.
Key in
＃system password＃
Go into system function setup.
Setting successfully,
beep sound occurred.
Wrong input, beep
sound on continuously.
back to system function selection.
Queuing for alarm
mode input.
ALARM MODE
( 0 / ON , 1 / OFF ) : 2
ALARM MODE
( 0 / ON , 1 / OFF ) : 0
ALARM MODE
( 0 / ON , 1 / OFF ) : 1
Key in 20
Key in ＃or ＊
Esc system function selection.
Key in the ＃or ＊
Go into function 20.
SYSTEM FUNCTIONS
SELECTION : _ _
status light on, display
function selection.
Key in
＃system password＃
Go into system function setup.
Setting successfully,
beep sound occurred.
Wrong input, beep
sound on continuously.
back to system function selection.
To Next Page
Loading...