Soca ST-680 - Page 15

15
Function (21) Anti-duress alarm mode:
(0) shows “ON”, (1) shows “OFF”. (pre-setting figure is 000). Once set at “ OFF “,
anti-duress alarm will not function.
Function (22): Door sensing mode:
(0) shows “ON”, (1) shows “OFF”. (pre-setting figure is 000). Once set at “OFF”, the
sensing mode will not function at any abnormal door opening.
Queuing for anti-
duress mode input.
ANTI-DURESS MODE
( 0 / ON , 1 / OFF ) : 2
ANTI-DURESS MODE
( 0 / ON , 1 / OFF ) : 0
ANTI-DURESS MODE
( 0 / ON , 1 / OFF ) : 1
Key in 21
Key in
＃
or
＊
Esc system function selection.
Key in the ＃or ＊
Go into function 21.
SYSTEM FUNCTIONS
SELECTION : _ _
status light on, display
function selection.
Key in
＃system password＃
Go into system function setup.
Setting successfully,
beep sound occurred.
Wrong input, beep
sound on continuously.
back to system function selection.
Queuing for door
sensing mode input.
DOOR SENSOR MODE
( 0 / ON , 1 / OFF ) : 2
DOOR SENSOR MODE
( 0 / ON , 1 / OFF ) : 1
DOOR SENSOR MODE
( 0 / ON , 1 / OFF ) : 0
Key in 22
Key in ＃or ＊
Esc system function selection.
Key in the ＃or ＊
Go into function 22.
SYSTEM FUNCTIONS
SELECTION : _ _
status light on, display
function selection.
Key in
＃system password＃
Go into system function setup.
Setting successfully,
beep sound occurred.
Wrong input, beep
sound on continuously.
back to system function selection.