Soca ST-680 - Page 17

17
Function (25) BEEP sound mode:
(0) shows “ON”, (1) shows “OFF”. (pre-setting figure is 000). Once set at “ OFF “, the
BEEP sound will not function.
Function (26) Print mode:
(0) shows “ON”, (1) shows “OFF”. (pre-setting figure is 001) Once set at “ON”, stored data
can be printed out immediately.
Queuing for BEEP
sound mode input.
BEEP MODE
( 0 / ON , 1 / OFF ) : 2
BEEP MODE
( 0 / ON , 1 / OFF ) : 1
BEEP MODE
( 0 / ON , 1 / OFF ) : 0
Key in 25
Key in ＃or ＊
Esc system function selection.
Key in the ＃or ＊
Go into function 25.
SYSTEM FUNCTIONS
SELECTION : _ _
status light on, display
function selection.
Key in
＃system password＃
Go into system function setup.
Setting successfully,
beep sound occurred.
Wrong input, beep
sound on continuously.
back to system function selection.
Queuing for
print mode input.
PRINT MODE
0 / ON , 1 / OFF ) : 2
PRINT MODE
( 0 / ON , 1 / OFF ) : 0
PRINT MODE
( 0 / ON , 1 / OFF ) : 1
Key in 26
Key in ＃or ＊
Esc system function selection.
Key in the
＃
or
＊
Go into function 26.
SYSTEM FUNCTIONS
SELECTION : _ _
status light on, display
function selection.
Key in
＃system password＃
Go into system function setup.
Setting successfully,
beep sound occurred.
Wrong input, beep
sound on continuously.
back to system function selection.