SoClean 2 User Guide

9
Now connect your PAP hose to the end of
the injection fitting.
You may operate the SoClean with or
without water in the humidifier reservoir.
The SoClean will disinfect any water in the
humidifier reservoir as long as the end of the
injection tubing rests on or near the bottom
of the reservoir, and below water level.
Note: Different reservoirs may require
different approaches to hose insertion. If
you have difficulty, visit
www.SoClean.com for information on
various humidifier models, or contact
SoClean directly at 1(866) 501-3705.
Without humidifier: If you are currently
not using a humidifier, remove the short
length of black tubing from the inside of the
injection fitting by pulling it straight off, and
then attach the fitting directly to your PAP
machine. Reconnect your PAP hose to the
end of the injection fitting. Depending on
the style of your reservoir, you may need to
disconnect the fitting to add water to your
reservoir.
If you regularly use your PAP without the
reservoir attached, please contact SoClean
to receive a modified injection fitting
(PN1116) at no charge.
You may call 1(866) 501-3705 or email
support@soclean.com.
3. Power Up
Remove small
injection tubing
first, do not insert
into PAP machine.
continued ... Getting Started
If you need help connecting to your specific machine, please visit our
support pages at www.SoClean.com/support/soclean-support/

SoClean 2 Specifications

General

Brand	SoClean
Model	2
Category	Accessories
Language	English