SoClean 2 User Manual

ENG | 17
SET CLOCK & DISINFECTING SCHEDULE
Your SoClean timer allows you to completely automate your daily disinfecting after connecting to your PAP. The SoClean comes
preset to start a 7 minute disinfecting cycle at 10:00am daily. However, you must set the clock to your current time. The
following procedures describe how to set the clock, schedule the daily disinfecting and start a disinfecting cycle immediately.
If you unplug the SoClean or experience a power loss, you will need to reset the current time only.
The disinfecting settings will remain saved. For safe use, operate your SoClean only as instructed in this guide.
Set Current Time
Set Current Time
Time Format:
12h
24h
Set the Clock
1. Press the button.
2. Change the time by pushing either the or
button until your current time is reached. By holding
down the button the time moves faster. Press the
button once more to store your time and return to the
home screen.
24-Hour Clock
To display in 24-hour format (military time):
1. Press the and buttons simultaneously.
2. With ‘Time Format’ selected, press the button
3. Choose either the 12 or 24-hour format by using
the button.
4. Press the button
5. Press the button to save.
WARNING: In the event of loss of power to your home
or the SoClean device, ensure the proper Clock time and
Cycle Start time are set before using your PAP machine.
Failure to do so may result in the SoClean device operating
at an unexpected time.
WARNING: Ensure the proper Clock time and Cycle Start
time are set before using your PAP machine. Pay particular
attention to the AM/PM setting if using 12-hr mode. Failure
to do so may result in the SoClean device operating at an
unexpected time.

SoClean 2 Specifications

General

Brand	SoClean
Model	2
Category	Accessories
Language	English