SoClean 2 User Manual

18 | SET LANGUAGE, CLOCK & DISINFECTING SCHEDULE
Set Run Time
(in minutes)
Set Run Time
(in minutes)
Set Start Time
Set Start Time
Set Cycle Length/ Schedule
the Daily Disinfecting
These two processes follow each other in this setup.
1. Press the button.
2. Press the or button to decrease or increase
the number of minutes of your cycle time.
Note: A run time of 5 to 12 minutes should disinfect your
PAP equipment. If you are in a climate with high humidity
and temperature, a longer disinfecting cycle might be
necessary.
4. Press the button again to save your cycle length
and schedule the cycle start time. To skip the start time
setup, press the button again when you reach
this step.
5. Press the or buttons to reach the desired start
time. Press the button again to save and return to the
home screen.
Note: Schedule a start time at least two hours before you
need to use the PAP machine. The entire disinfecting cycle
requires two hours plus the disinfection time to complete.
A green indicator light means that the cycle completed.

SoClean 2 Specifications

General

Brand	SoClean
Model	2
Category	Accessories
Language	English