14
Celios Technology brought to you by SoClean
Install the Pre Filter
The G200 comes with two Pre Filters. You will install
one and save one for future use. The Pre Filter is
made from material often found in HVAC systems,
specifically designed to capture large airborne
particles, such as dust, pollen, and pet dander. You
will need to replace your Pre Filter about every four
months.
1. Turn the G200 Core over, so the Celios logo
is facing down. Remove the back panel at the
bottom of the unit.
2. Slide the Pre Filter into place with the arrows
pointing toward the top of the Core. Make sure
to push the Pre Filter completely into the Core so
that the back panel can fully close.
1
2
To Next Page
Loading...