What to do if Pressure Light and Warning Light are illuminated and beeping is heard on SoClean Celios G200 Air Cleaner?
If the Pressure Light AND Warning Light are illuminated AND beeping is heard, it could be that the Core Filter isn't installed properly or is loaded. Ensure the Core Filter is fully seated and latched into the Core. If that doesn't work, remove and discard the old Core Filter, then install a new one.
Why SoClean Celios G200 Air Cleaner unit does not power on?
If your unit doesn't power on, it could be due to the following reasons: * Battery(ies) or AC adapter not installed. * Battery(ies) installed do not have charge. To resolve this: * Install charged batteries or connect to AC adapter. * Replace batteries with charged ones or install AC adapter.
What to do if SoClean Celios G200 powers on then immediately powers off?
If your unit powers on then immediately powers off, the battery(ies) may be low. Charge battery(ies) with the supplied AC adapter.
What to do if SoClean Celios G200 unit powered on, but fan does not operate and warning light is flashing?
If the unit is powered on, but the fan doesn't operate and the warning light is flashing, it may be a general system error. To resolve this, remove all power sources, then install the AC adapter to verify operation, and then add the battery(ies).
What to do if air exiting the SoClean Celios G200 Air Cleaner Core has an unpleasant smell?
If the air exiting the Core has an unpleasant smell, the Carbon Filter may be depleted. Replace the Carbon Filter.
What to do if flow is reduced but no Pressure Warning Light on SoClean Air Cleaner?
If the flow is reduced but there is no Pressure Warning Light, it could be that the Core Filter life is very close to zero. Replace the Core Filter.
What to do if SoClean Celios G200 remote will not pair?
If the remote will not pair, there may be an error in communications. Remove the batteries in the Remote. If the Pressure Light AND Warning Light are illuminated AND beeping is heard, remove all power sources from the Core. Reinstall power to the Core, then batteries into the Remote, and perform the pairing sequence again.
What to do if SoClean Air Cleaner Core will not fit into the Main Stand?
If the Core will not fit into the Main Stand, the Pre Filter may not be seated fully. Press the Pre Filter fully into place and install the Back Cover.
General| Brand | SoClean |
|---|---|
| Model | Celios G200 |
| Category | Air Cleaner |
| Language | English |
Essential safety precautions and warnings for operating the G200 air purifier.
Information regarding FCC rules, device compliance, and potential radio frequency interference.
Guidelines for safely disconnecting and servicing the G200 appliance.
Instructions for installing, using, and disposing of batteries for the G200.
Procedures for proper disposal and recycling of batteries, including safety precautions.
Guidelines for environmentally responsible disposal and recycling of the G200 air purifier.
Details the features and benefits of the main stand for the G200 air purifier.
Details the features and benefits of the mini stand for the G200 air purifier.
Instructions on how to install the Core, Carbon, and Pre filters into the G200 unit.
Step-by-step guide for installing the Core Filter into the G200 Core unit.
Step-by-step guide for installing the Pre Filter into the G200 Core unit.
Step-by-step guide for installing the Carbon Filter into the G200 Main Stand.
Instructions for inserting and using the rechargeable Lithium Ion Smart Batteries.
Detailed steps for inserting the Lithium Ion Smart Batteries into the G200 Core unit.
Instructions for connecting the G200 Core unit to the Main Stand and verifying connection.
Procedures for charging the G200 batteries, both inside and outside the main stand.
Specific procedure for initial battery charging to maximize runtime and battery life.
Guide to the Bluetooth remote control, its range, and storage.
Step-by-step instructions for pairing the remote control with the G200 Core unit.
Solutions for common issues encountered during remote control pairing with the G200.
Function of the power button on the G200 remote control for turning the unit on/off.
Function of the fan speed button on the remote for adjusting air purification levels.
Explanation of the indicator light on the remote control and its functions.
How to operate the night mode function using the remote control to adjust display illumination.
Description of the buttons and indicator lights on the G200 Core unit's control panel.
Instructions for cleaning the magnetically attached grills on the G200 Main Stand.
Explanation of audible alerts for docking, battery installation, blockages, and filter status.
Details LED alerts for filter life, how to pause alarms, and required filter replacement actions.
Solutions for unit power failure and battery charging problems.
Troubleshooting for errors indicated by lights and beeps, including core filter seating.
Solutions for remote pairing, reduced airflow, and unpleasant smells.
Troubleshooting for unit power cycling and filter life button alerts.
Details of the two-year limited warranty, coverage, exclusions, and customer responsibilities.
Important reminder to purchase genuine filters from SoClean.com to maintain warranty validity.
Provides customer support phone, email, website, and manufacturer contact information.
To Next Page
