19
Celios Technology brought to you by SoClean
Dock the G200 Core in the Main Stand
1. Plug the Power Adapter into the Main Stand
and then to a powered electrical outlet.
2. Slide the G200 Core into the Main Stand.
The control panel on the Core will be facing
the same side as the Remote.
3. When you correctly dock the G200 Core in the
Main Stand, the unit will beep (whether you have
AC power or not). If the G200 Core is not properly
installed, it will not beep and will not sit properly
within the Main Stand.
1
2
3
To Next Page
Loading...