21
Celios Technology brought to you by SoClean
Charging the Batteries the First Time
Properly charging the batteries will allow maximum runtime and battery life. The
following procedure should be followed on the first charge of any new batteries.
1. After inserting batteries, connect the Core with the supplied power adapter.
The Core can be docked in the Main Stand or plugged in directly.
2. Allow the batteries to charge until full . You may run the G200 on
any setting while charging.
3. Turn the unit on to Speed 1 and remove the power adapter plug.
4. Allow the unit to fully discharge and power off. This operation can take
up to 30 hours.
5. Fully charge the unit again per Steps 1 and 2 above. The batteries are now
properly charged for maximum performance.
This procedure can be repeated if the battery life is lower than expected. If this procedure
fails to increase battery life, contact Customer Care at 866-501-3705 or info@soclean.com.
To Next Page
Loading...