EasyManua.ls Logo

SoClean SC1500

Default Icon
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
STEP 3
Run a Cycle by first selecting your
desired Cycle Length then pushing
the Cycle Start button. The default
Cycle Length is set to 20 minutes.
WARNING: Discontinue use if
strong ozone odor is detected
or, in rare cases, if those with
respiratory sensitivities
experience irritation.
STEP 4
When the Cycle Complete icon lights
up green you can now push the Lid
Open Button and remove your items.
NOTE: You can cancel a Cycle at
any time. Simply press and hold
the Lid Open button for 5 seconds.
The cancellation will not happen
immediately. The system needs time
to purge the ozone from the Chamber.
During this time, the System icon will
flash red indicating the Lid is locked
and the Cycle Start button will
illuminate blue. The Progress Bar on
the Control Panel will flash blue while
the cycle cancellation is in progress.
The Cycle Complete Icon will light up
green when you can open the Lid to
remove your items.
USING YOUR SOCLEAN DEVICE DISINFECTOR

Related product manuals