Need help?Do you have a question about the socomec COUNTIS E50 and is the answer not in the manual?
General| Type | Energy meter |
|---|---|
| Display | LCD with backlight |
| Mounting Type | DIN rail |
| Operating Temperature | -10°C to +55°C |
| Measurement | Active energy, Reactive energy, Power factor |
| Accuracy | Class 1 (Active energy) / Class 2 (Reactive energy) |
| Communication | Modbus RS485 |
| Output Type | Pulse output |
| Frequency Range | 50/60 Hz |
| Storage Temperature | -20°C to +70°C |
| Protection Degree | IP20 |
| Weight | Approx. 300g |
Safety warning about dangers of electrocution, burns, or explosion during installation and maintenance.
Precautions to prevent damage to the device, focusing on voltage and current limits.
Recommendations regarding proximity to interference sources and avoiding excessive vibrations during installation.
Instructions for connecting the COUNTIS, emphasizing short-circuiting CT secondaries when disconnecting.
Lists the different programming menus available for configuration, with corresponding page references.
Step-by-step guide on how to access the device's programming mode using the CODE = 100.
Procedure for configuring the network type (e.g., 3NBL) for the device.
Instructions on setting the current transformer ratio (e.g., 1200/5A) for accurate measurements.
Details the conditions required for the connection test, including presence of current, voltage, and PF range.
Explanation of error codes (Err 01-06) related to CT and voltage connection inversions and their manual correction.
Description of the second test operation, noting it doesn't account for modifications from the first test.
Technical data for voltage, current, and power measurements, including overloads and update periods.
Specifies accuracy classes for active and reactive energy measurements (IEC 62053-22, IEC 62053-23).
To Next Page