socomec DIRIS Digiware D-70 - Page 2

3
4
Communication diagrams
DIRIS Digiware D-50
DIRIS Digiware D-70
DIN rail mouting kit (separate part number: 48290230)
1
2
*
24 VDC
(20 W max)
RS485
DIRIS Digiware D-50
Digiware Bus
Ethernet
120 Ω
NC
RS485 Digiware
LIYCY-CY
Ethernet
Digiware
Bus
MASTER
24 VDC
(20 W max)
Ethernet
24 V
SUPPLY
Technical characteristics DIRIS Digiware D-50 DIRIS Digiware D-70
Mechanical characteristics
10 buttons Capacitive touch technology
screen resolution 350 x 160 pixels
Device type Multi device display
Communication charcteristics
Ethernet RJ45 10/100 Mbs
Gateway:
MODBUS TCP
BACnet IP
SNMP v1, v2, v3
Embedded software - WEBVIEW-M
Max connectable devices Max 32 devices displayed
RJ45 Digiware bus Input
RS485 2-3 wires Input (Master)
Speed 38400 bds - 115200 bds
Micro USB Conguration and diagnostic
Dimensions
External dimensions 3.82x3.82 in / 97x97 mm
Door cut-out 3.62x3.62 in / 92x92 mm
Depth 1.77 in / 45 mm
Electrical characteristics
Supply 24 VDC +/- 10%, Class 2 - 20 W max
Supply protection Integrated into SOCOMEC supply (ref. 48290120) or use 24 VDC 1 A fuse
Consumption 2 VA 2.5 VA
Environmental conditions
Storage temperature -20 ... +70 °C
Operating temperature -10 ... +55 °C
Humidity 95 % at 40 °C
Installation category CAT III
Pollution degree 2
IP protection IP65 (front face)
Dimensions (in/mm)
3.88 98.5
3.62
+0.03
92
+0.8
1.22
0.63
Max 0.03
31
16
Max 0.8
3.88
3.62
+0.03
98.5
92
+0.8
RS485
DIRIS Digiware D-70
Webview
Digiware Bus
Ethernet
120 Ω
NC
RS485 Digiware
LIYCY-CY
Ethernet
Digiware
Bus
MASTER
24 VDC
(20 W max)
Ethernet
24 V
SUPPLY
*
24 VDC
(20 W max)
(*) The use of a 1A / 24 VDC fuse protection is recommended if the 24 VDC power supply is not provided by Socomec.
(*) The use of a 1A / 24 VDC fuse protection is recommended if the 24 VDC power supply is not provided by Socomec.
- 0
- 0
1 Nm max
STEP 1
STEP 3
STEP 2
STEP 4