Need help?Do you have a question about the socomec DIRIS Digiware D-70 and is the answer not in the manual?
General| Mounting | Panel mounting |
|---|---|
| Operating Temperature | -10°C to +55°C |
| Measurement Type | Electrical parameters (Voltage, Current, Power, Energy, etc.) |
| Current Input | 5 A |
| Communication Protocols | Modbus RTU, Modbus TCP |
| Display | LCD |
| Dimensions | 96 x 96 mm |
| Accuracy | Class 0.5 |
| Output | Digital outputs |
| Power supply | 85-265 VAC / 120-370 VDC |
| Voltage Inputs | 3-phase |
| Current Inputs | Via current sensors |
| Communication Interface | Ethernet, RS485 |
| Storage Temperature | -20°C to +70°C |
| Humidity | 5% to 95% RH (non-condensing) |
| Protection Degree | IP20 |
Details potential electrical, burn, or explosion hazards and necessary precautions.
Outlines precautions to prevent damage to the device during installation and operation.
Covers responsibilities for installation, connection, and use according to standards.
Emphasizes user and administrator training in IT security practices and corporate policies.
Details IT system architecture for safeguarding resources using firewalls, DMZs, VLANs, etc.
Explains how the device protects against attacks, ensures firmware integrity, and prevents viruses.
Covers data confidentiality, integrity, authenticity, and availability, including encryption.
Details user profiles, access rights, password management, and lockout policies.
Presents the DIRIS Digiware D-50 and D-70 multipoint displays and their specifications.
Describes the DIRIS Digiware D-50/D-70 as a central point for measurements from multiple devices.
Details the D-50's role as a master on the Digiware bus and its communication capabilities.
Explains the D-70's embedded web server (WEBVIEW-M) for remote visualization and data logging.
Details the display screen and the 10 shortcut keys for navigation and measurement access.
Explains the meaning of the ALARM (red), COM (orange), and ON (green) LED indicators.
Describes how to navigate through menus and select options using the device's interface.
Provides a detailed breakdown of the device's menu options and their functionalities.
Shows the physical dimensions of the DIRIS Digiware D-50/D-70 and the required door cut-out.
Refer to safety instructions for proper installation to prevent hazards and ensure device protection.
Details the process for panel-mounting the DIRIS Digiware D-50/D-70 display using clips.
Explains how to mount the DIRIS Digiware D-50/D-70 on a DIN rail using a dedicated accessory.
Describes the D-50/D-70 acting as an RS485 Master and its gateway function.
Explains the D-50/D-70 acting as an RS485 Slave communicating measurements.
Covers display interface settings, including language, date, RS485, and Ethernet communication.
Scans and assigns unique Modbus addresses to connected slave devices on Digiware and RS485 buses.
Guides through configuring the DIRIS Digiware system, including network and load settings.
Details how to connect and configure the device using the Easy Config System software via USB.
Explains how to connect and configure the device using Easy Config System via Ethernet.
Describes available user profiles (User, Advanced, Admin, Cyber security) and their access rights.
Details accessing and managing settings via the Admin profile, including device and protocol tabs.
Covers managing security policies, profiles, firmware upgrades, and network protection.
Provides information on using the WEBVIEW-M manual for data visualization.
Details physical attributes like screen type, resolution, protection index, and weight.
Lists communication interfaces and protocols supported by the D-50/D-70.
Covers power supply, power consumption, and battery specifications.
Details operating and storage conditions, including temperature, humidity, and pollution degree.
Lists electromagnetic compatibility characteristics and performance criteria against test standards.
Introduces SNMP as a protocol for network monitoring and its client-server mode.
Details the SNMP request types (Get, Set, Traps) supported by the devices.
Explains the features and security of SNMPv1, v2, and v3 versions.
Specifies the standard SNMP ports used for requests and notifications.
Details how to retrieve data using the MIB file and understanding OID structures.
Guides SNMP setup for V1, V2, and V3 using the Easy Config System software.
Introduces BACnet as a standard for interoperable building control equipment.
Explains BACnet objects and properties, listing supported objects for DIRIS Digiware.
Details BACnet IP settings configuration using the Easy Config System software.
Explains how to configure BACnet settings directly from the device's embedded webserver.
Details the FTP file export protocol, specifically for the DIRIS Digiware D-70.
Guides on activating and configuring the FTP server for automatic data export.
Details how to plan and schedule automatic data export via FTP.
Explains the structure and interpretation of exported .csv files when using EMS mode.
To Next Page
