Need help?Do you have a question about the socomec DIRIS Digiware D-50 and is the answer not in the manual?
General| Category | Recording Equipment |
|---|---|
| Model | DIRIS Digiware D-50 |
| Communication | Yes |
| Power Supply | 24 VDC |
| Mounting | DIN rail |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -25°C to +70°C |
| Measurement Inputs | Voltage, Current, Power, Energy |
| Current Range | Depends on associated current sensors |
| Current Input | 5 A |
| Accuracy | Class 0.5S (IEC 62053-22) |
| Communication Protocol | Modbus RTU |
| Display | LCD |
| Protection Degree | IP40 (front), IP20 (terminals) |
| Dimensions | 96 x 96 x 60 mm |
| Weight | Approx. 0.3 kg |
Essential safety precautions to prevent electrical hazards during installation and operation.
Guidelines to ensure the device operates correctly and avoid potential damage.
Instructions for panel mounting the DIRIS Digiware D-50/D-70 display through a door cutout.
Configuration options directly accessible on the DIRIS Digiware D-50/D-70 display interface.
Steps to configure the network settings for Ethernet connectivity.
Process for the display to automatically scan and address connected slave devices.
How to configure the DIRIS Digiware system using the Easy Config software via USB.
Overview of user profiles (User, Admin, Cyber Security) and their access rights.
Accessing and configuring security policies, protocols, and firewall settings.
To Next Page
