socomec DIRIS Digiware D-50 - Annex II - 5. Bacnet Configuration from the Embedded Webserver

65EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
Annex II - 5. BACnet conguration from the embedded webserver
Click on the “Wrench” icon on the top left corner and click on “Protocols”:
Click on the “Field protocols” tab, and under “Communication”, then BACnet, enter BACnet settings:
BACnet activation: activate or disable BACnet IP communication from the D-50/D-70 display.
Virtual Network ID: set the virtual Network ID of the D-50/D-70 display. It must be unique within the BACnet network.
Main instance ID: set the main Instance ID (100 by default) for the D-50/D-70 display. It must be unique within the BACnet
network.