socomec DIRIS Digiware D-50 - Ethernet Connection Mode

33EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
9.2. Ethernet connection mode
DIRIS Digiware
D-xx
DIRIS B
RS485
Digiware Bus
Digiware system
Easy Config System
Ethernet
- Open Easy Cong System.
- Log in as User or Admin. Admin default password is “Admin”.
- Click on “New conguration”, enter a name and icon.
- Click on the newly created conguration.
- Click on the “+” icon to manually add the D-50/D-70 display to the topology, by selecting the product, entering
the IP address, Modbus address. To be able to communicate with the D-50/D-70 display, your computer must be
in the same network as the D-50/D-70
- Click on the “Binocular” icon on the left side bar.
- In the “Organisation” part, select the D-70/D-50 display.
- In the “Data” part, click on “Dashboard” to visualise general information about the display.
- Click on “Auto-discovery” (1).