socomec DIRIS Digiware D-50 - Annex III. Ftp Configuration; Annex III - 1. FTP File Export Protocol (Only Available with DIRIS Digiware D-70); Annex III - 1.1. FTP Server Activation

66 EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
ANNEX III. FTP CONFIGURATION
Annex III - 1. FTP le export protocol (only available with DIRIS Digiware D-70)
Measurement logs (see “4.2.2. Introduction to DIRIS Digiware D-70”, page 9) can be automatically exported via FTP(S).
Annex III - 1.1. FTP server activation:
Connect to the web server and go to the “Protocols” menu:
Click on “Data Push”.
Authentication part:
Site Name & Server Name: used to identify from which DIRIS Digiware D-50/D-70 the les are being exported.
The default site name is “SITE” (must be modied if the export mode is set to EMS) and the default server name
corresponds to the NET ID marked on the front face of the D-50/D-70 gateway.