socomec DIRIS Digiware D-70 - Using the Device

51EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
12. USE
Once the loads are congured, you can visualise the measurements of each load from the "MEASURES" menu.
You can view active and nished alarms from the "EVENTS" menu.
HOME
|
LOADS
MEASURES
INPUTS/OUTPUTS
PROTECTION
EVENTS
PARAMETERS
...
If the "ALARM" LED of the D-50/D-70 display is lit, stable or ashing, it means there is at least one active alarm. Go to the
"EVENTS" menu to see which alarms are active.
HOME
|
LOADS
MEASURES
INPUTS/OUTPUTS
PROTECTION
EVENTS
...
Note: the "Password Alert" alarm remains active (and the ALARM LED of the D-50/D-70 display blinks) until you
change the default passwords of the Admin, Advanced and Cybersecurity proles on the webserver.
The "Password alert" alarm can also be disabled from the Easy Cong System software in the "Alarms" menu of
the D-50/D-70.