socomec DIRIS Digiware D-70 - Ethernet Communication; Setting the Date;Time on the Remote Product

20 EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
8.1.4. Ethernet communication
You can congure the Ethernet settings of DIRIS Digiware D-50 / D-70 displays:
• DHCP (IP address dynamically assigned by the Ethernet network) ENABLED/DISABLED
• IP address
• Subnet mask
• LAN gateway
PARAMETERS
|
DHCP
DISABLED
IP ADDRESS 192.168.000.003
MASK 255.255.255.000
GATEWAY 000.000.000.000
8.1.5. Setting the date/time on the remote product
You can congure the date and time on the DIRIS Digiware D-50/D-70 display:
• Manually by entering the year, month, day, hour, minute, second
• Automatically (like a computer) by SNTP server
If the DIRIS Digiware D-50/D-70 is synchronised by SNTP, it will broadcast and synchronise the date and time of all
downstream devices.
CONF. DATE/TIME
|
AUTO. REMOTE DATE/TIME SET
MANUAL
YEAR 00
MONTH 01
DAY 01
TIME 00
…
To congure the SNTP server, you will need to enter the following elds:
• SNTP server IP address
• SNTP server port
CONF. DATE/TIME
|
AUTO. REMOTE DATE/TIME SET
SNTP
SERVER IP ADDRESS: 000.000.000.000
SERVER PORT: 00123
TIME ZONE: GMT +9:00
OK