socomec DMS 210 - Page 24

!
!
!
5.4 Technical service
Socomec SpA, at its factory in Medesano (Parma-Italy), can solve any problem concerning the
use, maintenance and repair of the hammer.
Socomec SpA can supply the name of the nearest authorized workshop for any type of
assistance.
It is absolutely necessary to address to a specialized technical service centre.
5.4.1 Instructions for scrapping
The main materials composing the machine are listed below, with a reference to the
interested element:
All components of the structure and the moving parts Steel
Accumulator diaphragm Rubber
Upper and lower stroke-end stoppers Synthetic rubber
Seals & O-rings Rubber & teflon
Soundproofing materials Synthetic rubber
The accumulator contains nitrogen under pressure. Before scrapping,
exhaust the nitrogen under pressure, which is in the accumulator, through
the charging valve.
The various materials composing the machine must be demolished in
appropriate dumping grounds.
In any case stick to the laws in force in the country where the hammer is
used.
CLEANING, MAINTENANCE AND CHECKS
24
Page
of
33
5
Nederland B.V.